MACHINE SPECIFICATION
TYPE 25P MANUAL HOLLOW SPINDLE LATHE
Swing over bed: 673mm 26.5”
Swing over crosslide: 406mm 16”
Width of bedways: 552mm 21.75
Spindle nose: B1-20”
Spindle bore: 276mm 10.87”
Speed range: 4.2-290rpm
No speed gears: 12
Main motor: 15kw
Gearbox : Longitudinal-48 0.0014 to 0.035/rev
Cross 48 0.007 to 0.014/rev
Max thread pitch: TPI 48 normal 2-112tpi
Inch 39 0.156--8
Metric 66 0.5—200mm
Tailstock dia: 102mm 4”
Tailstock quill traverse: 254mm 10”
Approx weight of machine: 7320kgs 16,137lbs
Distance between centres: 2743mm 108”
IMAGE SHOWING A TAPER TURNING UNIT / ATTACHMENT
Tripping stops are part of the Pneumatic tool retraction and are used for the
fine adjustment of the tool retraction.
REAR IMAGE OF A PNEUMATIC TOOL RETRACTION
FRONT IMAGE OF A PNEUMATIC TOOL RETRACTION